PV 1524
1500 Watt / 24V
Features
1.Inverter with solar charger controller mppt
2.Pure sine wave
3.Auto OLP,OCP,OTP,SCP
4.Soft start,self recovery
Description
1500 Watt / 24V
Features
1.Inverter with solar charger controller mppt
2.Pure sine wave
3.Auto OLP,OCP,OTP,SCP
4.Soft start,self recovery
| SPECIFICATION | |
| MPPT Solar Controller Function | |
| Rated Voltage | 12/24V DC |
| Rated Charge Current | 40A |
| Load Current | 15A |
| Input Voltage Range | 15-55V DC |
| Max. PV open circuit array voltage | 55V DC |
| Typicle Idle Consumption | At idle< 10mA |
|
Over load protection (Dc load) |
2.0*Inom>5s; 1.5*Inom>20s; 1.25*Inom temperature controlled |
| Bulk charge | 14.6V(default) |
| Floating charge | 13.4V(default) |
| Equalization charge | 14.0V(default) |
| Over charge disconnection | 13.6V |
| Over charge recovery | 10.8V |
| Over charge disconnection | 12.3V(default) |
| Temperature compensation | -13.2mV/C |
| Load acid battery setting | Adjustable |
| NiCad battery setting | Adjustable |
| Load Control Mode | 1.Low Voltage Reconnect(LVR):Adjustable; 2.Low Voltage Disconnect(LVD):Automatic disconnection; 3.Reconnection:Includes warning flash before disconnect and reconnection |
| Low voltage reconnect | 12.0-14.0Vdc |
| Low voltage disconnect | 10.5-12.5Vdc |
| Ambient temperature | 0to 40°C(full load) 40-60°C(de-rating) |
| Altitude | Operating5000m, Non-Operating 16000m |
| Protection class | IP21 |
| Battery temperature sensor | BTS optional remote battery temperature sensor for increased charging precision |
| Terminal size (fine/single wire) | #8 AWG |
| PV Inverter Battery Priority | |
| Input voltage wave form | Sinusoldar (Utility or Generator) |
| Nominal input voltage | 230 Vac |
| Low line disconnect | 155Vdc±4% |
| High line disconnect | 285Dvc±4% |
| Max Ac input voltage | 270Vrms |
| Nominal Input Frequency | 50Hz/60Hz (Auto Detection) |
| Over load protection | Circuit Breaker |
| Output Shor Circuit Protection | Circuit Breaker |
| Efficiency Line Mode | >95% |
| Transfer swith rating | 30A |
| Transfer time (AC to DC) | 20ma (Typical) |
| Output voltage Waveform | Pure Sine Wave |
| Rated Output Power (W) | 1500 |
| Power Factor | 1 |
| Nominal Output Voltage | 230Vac |
| Output Voltage Regulation | ±10%rms |
| Nominal Efficiency | >80% |
| By Pass | Optional |
| AC Charger | Optional |
| Charge Current Regulation | ±5% |
| Battery Intial Volatage | 0-15.7Vdc / 31.4Vdc (can operate with 0V battery) |
| Communication | Rj11 (Used for Factory Testing, No Customer Interface Available) |
| Safety Certification | CE (EN80950) |
| EMI Classification | EN50091-2 class A |
| Operating Temperature range | 0°C to 40°C |
| Storage Temperature | -B5315°C-60°C |
| Operation Humidity | 5% to 96% |
| Audible Noise | 60dB Max. |
| Cooling | Forced Air Variable Speed Fan |
Do you have a question?
Drop us a line by compiling the form below. We will be more than happy to reply to any of your questions!
Reviews
There are no reviews yet.