PV 1024

1kw/24v Power Inverter with MPPT Charge Controller.



1000 Watt / 24V


1.Inverter with solar charger controller mppt
2.Pure sine wave
4.Soft start,self recovery

MPPT Solar Controller Funtion
Rated Voltage 12/24V DC
Rated Charge Current 40A
Load Current 15A
Input Voltage Range 15-55V DC
Max. PV open circuit array voltage 55V DC
Typicle Idle Consumption At idle< 10mA

Over load protection (Dc load)

2.0*Inom>5s; 1.5*Inom>20s; 1.25*Inom temperature controlled
Bulk charge 14.6V(default)
Floating charge 13.4V(default)
Equalization charge 14.0V(default)
Over charge disconnection 13.6V
Over charge recovery 10.8V
Over charge disconnection 12.3V(default)
Temperature compensation -13.2mV/C
Load acid battery setting Adjustable
NiCad battery setting Adjustable
Load Control Mode 1.Low Voltage Reconnect(LVR):Adjustable; 2.Low Voltage Disconnect(LVD):Automatic disconnection;   3.Reconnection:Includes warning flash before disconnect and reconnection
Low voltage reconnect 12.0-14.0Vdc
Low voltage disconnect 10.5-12.5Vdc
Ambient temperature 0to 40°C(full load)  40-60°C(de-rating)
Altitude Operating5000m, Non-Operating 16000m
Protection class IP21
Battery temperature sensor BTS optional remote battery temperature sensor for increased charging precision
Terminal size (fine/single wire) #8 AWG
PV Inverter Battery Priority
Input voltage wave form Sinusoldar (Utility or Generator)
Nominal input voltage 230 Vac
Low line disconnect 155Vdc±4%
High line disconnect 285Dvc±4%
Max Ac input voltage 270Vrms
Nominal Input Frequency 50Hz/60Hz (Auto Detection)
Over load protection Circuit Breaker
Output Shor Circuit Protection Circuit Breaker
Efficiency Line Mode >95%
Transfer swith rating 30A
Transfer time (AC to DC) 20ma (Typical)
Output voltage Waveform Pure Sine Wave
Rated Output Power (W) 1000
Power Factor 1
Nominal Output Voltage 230Vac
Output Voltage Regulation ±10%rms
Nominal Efficiency >80%
By Pass Optional
AC Charger Optional
Charge Current Regulation ±5%
Battery Intial Volatage 0-15.7Vdc / 31.4Vdc (can operate with 0V battery)
Communication Rj11 (Used for Factory Testing, No Customer Interface Available)
Safety Certification CE (EN80950)
EMI Classification EN50091-2 class A
Operating Temperature range 0°C to 40°C
Storage Temperature  -B5315°C-60°C
Operation Humidity 5% to 96%
Audible Noise 60dB Max.
Cooling Forced Air Variable Speed Fan


There are no reviews yet.

Be the first to review “PV 1024”

Your email address will not be published. Required fields are marked *

Do you have a question?

Drop us a line by compiling the form below. We will be more than happy to reply to any of your questions!

Your Name (required)

Your Email (required)