CP 1524

1500 Watt / 24V

Description

CP 1kw-3kw

1500 Watt / 24V

SPECIFICATION
Line Mode Specification Input Voltage Waveform Sinusoidal ( Utility or generator)
Nominal Input Voltage 230 Vac (120VAC selectanle)
Low Line Disconnect 184 Vac±4%
Low Line Re connect 294Vac±4%
Max Ac- Input Voltage 265Vac±4%
Nominal Input Frequency 255Vac±4%
Low Line Frequency Re-connect 270Vrms
Low Line Frequency Disconnect 50Hz/60Hz(Auto detection)
High Line Frequency Re-connect 58+0.3Hz for 60Hz;48+0.3Hz for 50Hz;
Output Voltage Waveform 57+0.3Hz for 60Hz;47+0.3Hz for 50Hz;
Over-Load Protection (SMPS load) 64+0.3Hz for 60Hz;54+0.3Hz for 50Hz;
Output Short Circuit Protection 65+0.3Hz for 60Hz;55+0.3Hz for 50Hz;
Efficiency (Line Mode) As same as Input Waveform
Transfer Switch Rating Circuit Breaker
Transfer Time (Ac to Dc) Circuit Breaker
Pass Through Without Battery >95%
Max Bypass Overload Current 30A
Invert Mode Specification Output Voltage Wave Form Sine Wave
Rated Output Power (VA) 1500
Rated Output Power (W) 1500
Power Factor 0~1.0
Nominal Output Voltage (V) 230Vac
Nominal Output Frequency (Hz) 50Hz±0.3Hz
Auto Tracking Main Frequency (Hz) Yes (Following Main First Connection) 50Hz @ 48-54Hz; 60Hz @ 58-64Hz
Auto Voltage Regulation ±10%rms
Nominal Efficiency >80%
Over Load Protection (SMPS load) (110%<load<125%)±10%:Fault (shutdown output) after 15 minutes; (125%<load<150%)10%:         Fault (shutdown output after 60s; Load>150%±10%: Fault (shutdown output) after 20s
Surge rating (10s) 4500VA
Capable of Starting Electric Motor 1HP
Output Short Circuit Protection Current Limit (Fault after 10s)
Inverter Breaker Size 10A
Nominal Dc Input Voltage 24V
Min DC Start Voltage 10V/20V/40V
Low Battery Alarm 10.5Vdc±0.3Vdc for 12V battery: 21.0Vdc for 24V battery: 42.0Vdc±0.6Vdc for 48V battery
Low DC Input Shut-Down 10.0Vdc±0.3Vdc for 12V battery: 20.0Vdc for 24V battery: 40.0Vdc±0.6Vdc for 48V battery
High DC Input Alarm & Fault 16.0Vdc±0.3Vdc for 12V battery: 32.0Vdc for 24V battery: 64.0Vdc±0.6Vdc for 48V battery
High DC Input Recovery 15.5Vdc±0.3Vdc for 12V battery: 31.0Vdc for 24V battery: 62.0Vdc±0.6Vdc for 48V battery
Power Saver Load£25W(Enable on “P/S auto” setting of Remote contro)
Charge Mode Specification Nominal Input Voltage 230Vac
Input Voltage Range 196-243Vac
Nominal Output Voltage According to the battery type
Nominal Charge Current 35A
Battery Initial Voltage ±5Adc
Charge Short Circuit Protection 0-15.7Vdc/31.4Vdc/62.8Vdc (can operate with OV battery)
Charge Current Regulation Circuit breaker
Over Charge Protection Bat. V£15.7Vdc/31.4Vdc/62.8Vdc, deep 0.5s every 1s & fault after 60s
General Specification Safety Certification CE
Operating Temperature Range FCC
Storage Temperature 15°C below zero to 60°C
Operation Humidity 5% to 95%
Audible Noise 60dB max
Cooling Forced air, variable speed fan
Size 590x333x310
Weight: Net/Gross (Kg) 20

Reviews

There are no reviews yet.

Be the first to review “CP 1524”

Your email address will not be published. Required fields are marked *

Do you have a question?

Drop us a line by compiling the form below. We will be more than happy to reply to any of your questions!

Your Name (required)

Your Email (required)

Subject

Enquiry